1. Project: ________________________
|
2. Location (City & State): ________________________
- Re: Freight quote third party billing or collect
|
3. Panel Profile / Name (Verifying curving direction): _____________
|
4. Design outside radius (R): ___________
|
5. Design arc angle (degrees curved): __________
|
6. Radius girth panel length (b): ____________
|
7. Uncurved tangent leg (S1): _____________
|
8. Uncurved tangent leg (S2): _____________
Note: One tangent leg is required on either end when radius is less than 9'-0". Tangent legs are NOT required when radius is larger than 9'-0" unless specified.
|
9. Total panel length required (B): __________
|
10. Gauge steel or Aluminum thickness: _______
- 18 gauge surcharge (yes/no): _________
|
11. Panels sidelap w/ others (yes/no): _________
|
12. Panels sidelap w/ selves only (yes/no): _____
|
13. Curved 18 ga. Framing girts (yes/no): _______
|
14. Curved flashings (10'-0" arc length)(yes/no): _______
- No. flatsheet required (42" X 120" min.): ________
|
15. Curved miter corners (yes/no): _______
- Outside: ______
- Inside: ______
Note: 1'-0" to 5'-0" radius = 6" increments; 6'-0" to 9'-0" radius = 12" increments.
|
16. Set-up panels (2 per radius or arc change): ______
|
17. No. Panels required: ______
|
18. Set-up charge (less than 30 panels project total): _______
|
19. Skids/packaging:
- Panels: ________ Miters: ________ Flashings: ________ |
